The central class of the library. This is the QWidget which displays the plot and interacts with the user. Más...

Diagrama de herencias de QCustomPlot

Tipos públicos
enum	LayerInsertMode { limBelow, limAbove }

Señales
void	mouseDoubleClick (QMouseEvent *event)

void	mousePress (QMouseEvent *event)

void	mouseMove (QMouseEvent *event)

void	mouseRelease (QMouseEvent *event)

void	mouseWheel (QWheelEvent *event)

void	plottableClick (QCPAbstractPlottable plottable, QMouseEvent event)

void	plottableDoubleClick (QCPAbstractPlottable plottable, QMouseEvent event)

void	itemClick (QCPAbstractItem item, QMouseEvent event)

void	itemDoubleClick (QCPAbstractItem item, QMouseEvent event)

void	axisClick (QCPAxis axis, QCPAxis::SelectablePart part, QMouseEvent event)

void	axisDoubleClick (QCPAxis axis, QCPAxis::SelectablePart part, QMouseEvent event)

void	legendClick (QCPLegend legend, QCPAbstractLegendItem item, QMouseEvent *event)

void	legendDoubleClick (QCPLegend legend, QCPAbstractLegendItem item, QMouseEvent *event)

void	titleClick (QMouseEvent event, QCPPlotTitle title)

void	titleDoubleClick (QMouseEvent event, QCPPlotTitle title)

void	selectionChangedByUser ()

void	beforeReplot ()

void	afterReplot ()

Métodos públicos
	QCustomPlot (QWidget *parent=0)

QRect	viewport () const

QPixmap	background () const

bool	backgroundScaled () const

Qt::AspectRatioMode	backgroundScaledMode () const

QCPLayoutGrid *	plotLayout () const

QCP::AntialiasedElements	antialiasedElements () const

QCP::AntialiasedElements	notAntialiasedElements () const

bool	autoAddPlottableToLegend () const

const QCP::Interactions	interactions () const

int	selectionTolerance () const

bool	noAntialiasingOnDrag () const

QCP::PlottingHints	plottingHints () const

Qt::KeyboardModifier	multiSelectModifier () const

void	setViewport (const QRect &rect)

void	setBackground (const QPixmap &pm)

void	setBackground (const QPixmap &pm, bool scaled, Qt::AspectRatioMode mode=Qt::KeepAspectRatioByExpanding)

void	setBackground (const QBrush &brush)

void	setBackgroundScaled (bool scaled)

void	setBackgroundScaledMode (Qt::AspectRatioMode mode)

void	setAntialiasedElements (const QCP::AntialiasedElements &antialiasedElements)

void	setAntialiasedElement (QCP::AntialiasedElement antialiasedElement, bool enabled=true)

void	setNotAntialiasedElements (const QCP::AntialiasedElements &notAntialiasedElements)

void	setNotAntialiasedElement (QCP::AntialiasedElement notAntialiasedElement, bool enabled=true)

void	setAutoAddPlottableToLegend (bool on)

void	setInteractions (const QCP::Interactions &interactions)

void	setInteraction (const QCP::Interaction &interaction, bool enabled=true)

void	setSelectionTolerance (int pixels)

void	setNoAntialiasingOnDrag (bool enabled)

void	setPlottingHints (const QCP::PlottingHints &hints)

void	setPlottingHint (QCP::PlottingHint hint, bool enabled=true)

void	setMultiSelectModifier (Qt::KeyboardModifier modifier)

QCPAbstractPlottable *	plottable (int index)

QCPAbstractPlottable *	plottable ()

bool	addPlottable (QCPAbstractPlottable *plottable)

bool	removePlottable (QCPAbstractPlottable *plottable)

bool	removePlottable (int index)

int	clearPlottables ()

int	plottableCount () const

QList< QCPAbstractPlottable * >	selectedPlottables () const

QCPAbstractPlottable *	plottableAt (const QPointF &pos, bool onlySelectable=false) const

bool	hasPlottable (QCPAbstractPlottable *plottable) const

QCPGraph *	graph (int index) const

QCPGraph *	graph () const

QCPGraph *	addGraph (QCPAxis keyAxis=0, QCPAxis valueAxis=0)

bool	removeGraph (QCPGraph *graph)

bool	removeGraph (int index)

int	clearGraphs ()

int	graphCount () const

QList< QCPGraph * >	selectedGraphs () const

QCPAbstractItem *	item (int index) const

QCPAbstractItem *	item () const

bool	addItem (QCPAbstractItem *item)

bool	removeItem (QCPAbstractItem *item)

bool	removeItem (int index)

int	clearItems ()

int	itemCount () const

QList< QCPAbstractItem * >	selectedItems () const

QCPAbstractItem *	itemAt (const QPointF &pos, bool onlySelectable=false) const

bool	hasItem (QCPAbstractItem *item) const

QCPLayer *	layer (const QString &name) const

QCPLayer *	layer (int index) const

QCPLayer *	currentLayer () const

bool	setCurrentLayer (const QString &name)

bool	setCurrentLayer (QCPLayer *layer)

int	layerCount () const

bool	addLayer (const QString &name, QCPLayer *otherLayer=0, LayerInsertMode insertMode=limAbove)

bool	removeLayer (QCPLayer *layer)

bool	moveLayer (QCPLayer layer, QCPLayer otherLayer, LayerInsertMode insertMode=limAbove)

int	axisRectCount () const

QCPAxisRect *	axisRect (int index=0) const

QList< QCPAxisRect * >	axisRects () const

QCPLayoutElement *	layoutElementAt (const QPointF &pos) const

Q_SLOT void	rescaleAxes (bool onlyVisiblePlottables=false)

QList< QCPAxis * >	selectedAxes () const

QList< QCPLegend * >	selectedLegends () const

Q_SLOT void	deselectAll ()

bool	savePdf (const QString &fileName, bool noCosmeticPen=false, int width=0, int height=0)

bool	savePng (const QString &fileName, int width=0, int height=0, double scale=1.0, int quality=-1)

bool	saveJpg (const QString &fileName, int width=0, int height=0, double scale=1.0, int quality=-1)

bool	saveBmp (const QString &fileName, int width=0, int height=0, double scale=1.0)

bool	saveRastered (const QString &fileName, int width, int height, double scale, const char *format, int quality=-1)

QPixmap	toPixmap (int width=0, int height=0, double scale=1.0)

void	toPainter (QCPPainter *painter, int width=0, int height=0)

Q_SLOT void	replot ()

Atributos públicos
QCPAxis *	xAxis

QCPAxis *	yAxis

QCPAxis *	xAxis2

QCPAxis *	yAxis2

QCPLegend *	legend

Métodos protegidos
virtual QSize	minimumSizeHint () const

virtual QSize	sizeHint () const

virtual void	paintEvent (QPaintEvent *event)

virtual void	resizeEvent (QResizeEvent *event)

virtual void	mouseDoubleClickEvent (QMouseEvent *event)

virtual void	mousePressEvent (QMouseEvent *event)

virtual void	mouseMoveEvent (QMouseEvent *event)

virtual void	mouseReleaseEvent (QMouseEvent *event)

virtual void	wheelEvent (QWheelEvent *event)

virtual void	draw (QCPPainter *painter)

virtual void	axisRemoved (QCPAxis *axis)

virtual void	legendRemoved (QCPLegend *legend)

void	updateLayerIndices () const

QCPLayerable *	layerableAt (const QPointF &pos, bool onlySelectable, QVariant *selectionDetails=0) const

void	drawBackground (QCPPainter *painter)

Atributos protegidos
QRect	mViewport

QCPLayoutGrid *	mPlotLayout

bool	mAutoAddPlottableToLegend

QList< QCPAbstractPlottable * >	mPlottables

QList< QCPGraph * >	mGraphs

QList< QCPAbstractItem * >	mItems

QList< QCPLayer * >	mLayers

QCP::AntialiasedElements	mAntialiasedElements

QCP::AntialiasedElements	mNotAntialiasedElements

QCP::Interactions	mInteractions

int	mSelectionTolerance

bool	mNoAntialiasingOnDrag

QBrush	mBackgroundBrush

QPixmap	mBackgroundPixmap

QPixmap	mScaledBackgroundPixmap

bool	mBackgroundScaled

Qt::AspectRatioMode	mBackgroundScaledMode

QCPLayer *	mCurrentLayer

QCP::PlottingHints	mPlottingHints

Qt::KeyboardModifier	mMultiSelectModifier

QPixmap	mPaintBuffer

QPoint	mMousePressPos

QCPLayoutElement *	mMouseEventElement

bool	mReplotting

Amigas
class	QCPLegend

class	QCPAxis

class	QCPLayer

class	QCPAxisRect

Descripción detallada

The central class of the library. This is the QWidget which displays the plot and interacts with the user.

For tutorials on how to use QCustomPlot, see the website
http://www.qcustomplot.com/

Documentación de las enumeraciones miembro de la clase

enum QCustomPlot::LayerInsertMode

Defines how a layer should be inserted relative to an other layer.

Ver también: addLayer, moveLayer

Valores de enumeraciones
limBelow	Layer is inserted below other layer.
limAbove	Layer is inserted above other layer.

Documentación del constructor y destructor

QCustomPlot::QCustomPlot ( QWidget * parent = 0 )

explicit

Constructs a QCustomPlot and sets reasonable default values.

Documentación de las funciones miembro

QCPGraph * QCustomPlot::addGraph	(	QCPAxis *	keyAxis = `0`,
		QCPAxis *	valueAxis = `0`
	)

Creates a new graph inside the plot. If keyAxis and valueAxis are left unspecified (0), the bottom (xAxis) is used as key and the left (yAxis) is used as value axis. If specified, keyAxis and valueAxis must reside in this QCustomPlot.

keyAxis will be used as key axis (typically "x") and valueAxis as value axis (typically "y") for the graph.

Returns a pointer to the newly created graph, or 0 if adding the graph failed.

Ver también: graph, graphCount, removeGraph, clearGraphs

bool QCustomPlot::addItem ( QCPAbstractItem * item )

Adds the specified item to the plot. QCustomPlot takes ownership of the item.

Returns true on success, i.e. when item wasn't already in the plot and the parent plot of item is this QCustomPlot.

Ver también: item, itemCount, removeItem, clearItems

bool QCustomPlot::addLayer	(	const QString &	name,
		QCPLayer *	otherLayer = `0`,
		QCustomPlot::LayerInsertMode	insertMode = `limAbove`
	)

Adds a new layer to this QCustomPlot instance. The new layer will have the name name, which must be unique. Depending on insertMode, it is positioned either below or above otherLayer.

Returns true on success, i.e. if there is no other layer named name and otherLayer is a valid layer inside this QCustomPlot.

If otherLayer is 0, the highest layer in the QCustomPlot will be used.

For an explanation of what layers are in QCustomPlot, see the documentation of QCPLayer.

Ver también: layer, moveLayer, removeLayer

bool QCustomPlot::addPlottable ( QCPAbstractPlottable * plottable )

Adds the specified plottable to the plot and, if setAutoAddPlottableToLegend is enabled, to the legend (QCustomPlot::legend). QCustomPlot takes ownership of the plottable.

Returns true on success, i.e. when plottable isn't already in the plot and the parent plot of plottable is this QCustomPlot (the latter is controlled by what axes were passed in the plottable's constructor).

Ver también: plottable, plottableCount, removePlottable, clearPlottables

void QCustomPlot::afterReplot ( )

signal

This signal is emitted immediately after a replot has taken place (caused by a call to the slot replot).

It is safe to mutually connect the replot slot with this signal on two QCustomPlots to make them replot synchronously, it won't cause an infinite recursion.

Ver también: replot, beforeReplot

void QCustomPlot::axisClick	(	QCPAxis *	axis,
		QCPAxis::SelectablePart	part,
		QMouseEvent *	event
	)

signal

This signal is emitted when an axis is clicked.

event is the mouse event that caused the click, axis is the axis that received the click and part indicates the part of the axis that was clicked.

Ver también: axisDoubleClick

void QCustomPlot::axisDoubleClick	(	QCPAxis *	axis,
		QCPAxis::SelectablePart	part,
		QMouseEvent *	event
	)

signal

This signal is emitted when an axis is double clicked.

event is the mouse event that caused the click, axis is the axis that received the click and part indicates the part of the axis that was clicked.

Ver también: axisClick

QCPAxisRect * QCustomPlot::axisRect ( int index = 0 ) const

Returns the axis rect with index.

Initially, only one axis rect (with index 0) exists in the plot. If multiple axis rects were added, all of them may be accessed with this function in a linear fashion (even when they are nested in a layout hierarchy or inside other axis rects via QCPAxisRect::insetLayout).

Ver también: axisRectCount, axisRects

int QCustomPlot::axisRectCount ( ) const

Returns the number of axis rects in the plot.

All axis rects can be accessed via QCustomPlot::axisRect().

Initially, only one axis rect exists in the plot.

Ver también: axisRect, axisRects

QList< QCPAxisRect * > QCustomPlot::axisRects ( ) const

Returns all axis rects in the plot.

Ver también: axisRectCount, axisRect

void QCustomPlot::beforeReplot ( )

signal

This signal is emitted immediately before a replot takes place (caused by a call to the slot replot).

It is safe to mutually connect the replot slot with this signal on two QCustomPlots to make them replot synchronously, it won't cause an infinite recursion.

Ver también: replot, afterReplot

int QCustomPlot::clearGraphs ( )

Removes all graphs from the plot (and the QCustomPlot::legend, if necessary).

Returns the number of graphs removed.

Ver también: removeGraph

int QCustomPlot::clearItems ( )

Removes all items from the plot.

Returns the number of items removed.

Ver también: removeItem

int QCustomPlot::clearPlottables ( )

Removes all plottables from the plot (and the QCustomPlot::legend, if necessary).

Returns the number of plottables removed.

Ver también: removePlottable

QCPLayer * QCustomPlot::currentLayer ( ) const

Returns the layer that is set as current layer (see setCurrentLayer).

void QCustomPlot::deselectAll ( )

Deselects all layerables (plottables, items, axes, legends,...) of the QCustomPlot.

Since calling this function is not a user interaction, this does not emit the selectionChangedByUser signal. The individual selectionChanged signals are emitted though, if the objects were previously selected.

Ver también: setInteractions, selectedPlottables, selectedItems, selectedAxes, selectedLegends

QCPGraph * QCustomPlot::graph ( int index ) const

Returns the graph with index. If the index is invalid, returns 0.

There is an overloaded version of this function with no parameter which returns the last created graph, see QCustomPlot::graph()

Ver también: graphCount, addGraph

QCPGraph * QCustomPlot::graph ( ) const

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Returns the last graph, that was created with addGraph. If there are no graphs in the plot, returns 0.

Ver también: graphCount, addGraph

int QCustomPlot::graphCount ( ) const

Returns the number of currently existing graphs in the plot

Ver también: graph, addGraph

bool QCustomPlot::hasItem ( QCPAbstractItem * item ) const

Returns whether this QCustomPlot contains the item.

Ver también: addItem

bool QCustomPlot::hasPlottable ( QCPAbstractPlottable * plottable ) const

Returns whether this QCustomPlot instance contains the plottable.

Ver también: addPlottable

QCPAbstractItem * QCustomPlot::item ( int index ) const

Returns the item with index. If the index is invalid, returns 0.

There is an overloaded version of this function with no parameter which returns the last added item, see QCustomPlot::item()

Ver también: itemCount, addItem

QCPAbstractItem * QCustomPlot::item ( ) const

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Returns the last item, that was added with addItem. If there are no items in the plot, returns 0.

Ver también: itemCount, addItem

QCPAbstractItem * QCustomPlot::itemAt	(	const QPointF &	pos,
		bool	onlySelectable = `false`
	)		const

Returns the item at the pixel position pos. Items that only consist of single lines (e.g. QCPItemLine or QCPItemCurve) have a tolerance band around them, see setSelectionTolerance. If multiple items come into consideration, the one closest to pos is returned.

If onlySelectable is true, only items that are selectable (QCPAbstractItem::setSelectable) are considered.

If there is no item at pos, the return value is 0.

Ver también: plottableAt, layoutElementAt

void QCustomPlot::itemClick	(	QCPAbstractItem *	item,
		QMouseEvent *	event
	)

signal

This signal is emitted when an item is clicked.

event is the mouse event that caused the click and item is the item that received the click.

Ver también: itemDoubleClick

int QCustomPlot::itemCount ( ) const

Returns the number of currently existing items in the plot

Ver también: item, addItem

void QCustomPlot::itemDoubleClick	(	QCPAbstractItem *	item,
		QMouseEvent *	event
	)

signal

This signal is emitted when an item is double clicked.

event is the mouse event that caused the click and item is the item that received the click.

Ver también: itemClick

QCPLayer * QCustomPlot::layer ( const QString & name ) const

Returns the layer with the specified name. If there is no layer with the specified name, 0 is returned.

Layer names are case-sensitive.

Ver también: addLayer, moveLayer, removeLayer

QCPLayer * QCustomPlot::layer ( int index ) const

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Returns the layer by index. If the index is invalid, 0 is returned.

Ver también: addLayer, moveLayer, removeLayer

int QCustomPlot::layerCount ( ) const

Returns the number of currently existing layers in the plot

Ver también: layer, addLayer

QCPLayoutElement * QCustomPlot::layoutElementAt ( const QPointF & pos ) const

Returns the layout element at pixel position pos. If there is no element at that position, returns 0.

Only visible elements are used. If QCPLayoutElement::setVisible on the element itself or on any of its parent elements is set to false, it will not be considered.

Ver también: itemAt, plottableAt

void QCustomPlot::legendClick	(	QCPLegend *	legend,
		QCPAbstractLegendItem *	item,
		QMouseEvent *	event
	)

signal

This signal is emitted when a legend (item) is clicked.

event is the mouse event that caused the click, legend is the legend that received the click and item is the legend item that received the click. If only the legend and no item is clicked, item is 0. This happens for a click inside the legend padding or the space between two items.

Ver también: legendDoubleClick

void QCustomPlot::legendDoubleClick	(	QCPLegend *	legend,
		QCPAbstractLegendItem *	item,
		QMouseEvent *	event
	)

signal

This signal is emitted when a legend (item) is double clicked.

event is the mouse event that caused the click, legend is the legend that received the click and item is the legend item that received the click. If only the legend and no item is clicked, item is 0. This happens for a click inside the legend padding or the space between two items.

Ver también: legendClick

void QCustomPlot::mouseDoubleClick ( QMouseEvent * event )

signal

This signal is emitted when the QCustomPlot receives a mouse double click event.

void QCustomPlot::mouseMove ( QMouseEvent * event )

signal

This signal is emitted when the QCustomPlot receives a mouse move event.

It is emitted before QCustomPlot handles any other mechanism like range dragging. So a slot connected to this signal can still influence the behaviour e.g. with QCPAxisRect::setRangeDrag or QCPAxisRect::setRangeDragAxes.

Atención: It is discouraged to change the drag-axes with QCPAxisRect::setRangeDragAxes here, because the dragging starting point was saved the moment the mouse was pressed. Thus it only has a meaning for the range drag axes that were set at that moment. If you want to change the drag axes, consider doing this in the mousePress signal instead.

void QCustomPlot::mousePress ( QMouseEvent * event )

signal

This signal is emitted when the QCustomPlot receives a mouse press event.

It is emitted before QCustomPlot handles any other mechanism like range dragging. So a slot connected to this signal can still influence the behaviour e.g. with QCPAxisRect::setRangeDrag or QCPAxisRect::setRangeDragAxes.

void QCustomPlot::mouseRelease ( QMouseEvent * event )

signal

This signal is emitted when the QCustomPlot receives a mouse release event.

It is emitted before QCustomPlot handles any other mechanisms like object selection. So a slot connected to this signal can still influence the behaviour e.g. with setInteractions or QCPAbstractPlottable::setSelectable.

void QCustomPlot::mouseWheel ( QWheelEvent * event )

signal

This signal is emitted when the QCustomPlot receives a mouse wheel event.

It is emitted before QCustomPlot handles any other mechanisms like range zooming. So a slot connected to this signal can still influence the behaviour e.g. with QCPAxisRect::setRangeZoom, QCPAxisRect::setRangeZoomAxes or QCPAxisRect::setRangeZoomFactor.

bool QCustomPlot::moveLayer	(	QCPLayer *	layer,
		QCPLayer *	otherLayer,
		QCustomPlot::LayerInsertMode	insertMode = `limAbove`
	)

Moves the specified layer either above or below otherLayer. Whether it's placed above or below is controlled with insertMode.

Returns true on success, i.e. when both layer and otherLayer are valid layers in the QCustomPlot.

Ver también: layer, addLayer, moveLayer

QCPLayoutGrid * QCustomPlot::plotLayout ( ) const

inline

Returns the top level layout of this QCustomPlot instance. It is a QCPLayoutGrid, initially containing just one cell with the main QCPAxisRect inside.

QCPAbstractPlottable * QCustomPlot::plottable ( int index )

Returns the plottable with index. If the index is invalid, returns 0.

There is an overloaded version of this function with no parameter which returns the last added plottable, see QCustomPlot::plottable()

Ver también: plottableCount, addPlottable

QCPAbstractPlottable * QCustomPlot::plottable ( )

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Returns the last plottable that was added with addPlottable. If there are no plottables in the plot, returns 0.

Ver también: plottableCount, addPlottable

QCPAbstractPlottable * QCustomPlot::plottableAt	(	const QPointF &	pos,
		bool	onlySelectable = `false`
	)		const

Returns the plottable at the pixel position pos. Plottables that only consist of single lines (like graphs) have a tolerance band around them, see setSelectionTolerance. If multiple plottables come into consideration, the one closest to pos is returned.

If onlySelectable is true, only plottables that are selectable (QCPAbstractPlottable::setSelectable) are considered.

If there is no plottable at pos, the return value is 0.

Ver también: itemAt, layoutElementAt

void QCustomPlot::plottableClick	(	QCPAbstractPlottable *	plottable,
		QMouseEvent *	event
	)

signal

This signal is emitted when a plottable is clicked.

event is the mouse event that caused the click and plottable is the plottable that received the click.

Ver también: plottableDoubleClick

int QCustomPlot::plottableCount ( ) const

Returns the number of currently existing plottables in the plot

Ver también: plottable, addPlottable

void QCustomPlot::plottableDoubleClick	(	QCPAbstractPlottable *	plottable,
		QMouseEvent *	event
	)

signal

This signal is emitted when a plottable is double clicked.

event is the mouse event that caused the click and plottable is the plottable that received the click.

Ver también: plottableClick

bool QCustomPlot::removeGraph ( QCPGraph * graph )

Removes the specified graph from the plot and, if necessary, from the QCustomPlot::legend. If any other graphs in the plot have a channel fill set towards the removed graph, the channel fill property of those graphs is reset to zero (no channel fill).

Returns true on success.

Ver también: clearGraphs

bool QCustomPlot::removeGraph ( int index )

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Removes the graph by its index.

bool QCustomPlot::removeItem ( QCPAbstractItem * item )

Removes the specified item from the plot.

Returns true on success.

Ver también: addItem, clearItems

bool QCustomPlot::removeItem ( int index )

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Removes the item by its index.

bool QCustomPlot::removeLayer ( QCPLayer * layer )

Removes the specified layer and returns true on success.

All layerables (e.g. plottables and items) on the removed layer will be moved to the layer below layer. If layer is the bottom layer, the layerables are moved to the layer above. In both cases, the total rendering order of all layerables in the QCustomPlot is preserved.

If layer is the current layer (setCurrentLayer), the layer below (or above, if bottom layer) becomes the new current layer.

It is not possible to remove the last layer of the plot.

Ver también: layer, addLayer, moveLayer

bool QCustomPlot::removePlottable ( QCPAbstractPlottable * plottable )

Removes the specified plottable from the plot and, if necessary, from the legend (QCustomPlot::legend).

Returns true on success.

Ver también: addPlottable, clearPlottables

bool QCustomPlot::removePlottable ( int index )

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Removes the plottable by its index.

void QCustomPlot::replot ( )

Causes a complete replot into the internal buffer. Finally, update() is called, to redraw the buffer on the QCustomPlot widget surface. This is the method that must be called to make changes, for example on the axis ranges or data points of graphs, visible.

Under a few circumstances, QCustomPlot causes a replot by itself. Those are resize events of the QCustomPlot widget and user interactions (object selection and range dragging/zooming).

Before the replot happens, the signal beforeReplot is emitted. After the replot, afterReplot is emitted. It is safe to mutually connect the replot slot with any of those two signals on two QCustomPlots to make them replot synchronously, it won't cause an infinite recursion.

void QCustomPlot::rescaleAxes ( bool onlyVisiblePlottables = false )

Rescales the axes such that all plottables (like graphs) in the plot are fully visible.

if onlyVisiblePlottables is set to true, only the plottables that have their visibility set to true (QCPLayerable::setVisible), will be used to rescale the axes.

Ver también: QCPAbstractPlottable::rescaleAxes, QCPAxis::rescale

bool QCustomPlot::saveBmp	(	const QString &	fileName,
		int	width = `0`,
		int	height = `0`,
		double	scale = `1.0`
	)

Saves a BMP image file to fileName on disc. The output plot will have the dimensions width and height in pixels. If either width or height is zero, the exported image will have the same dimensions as the QCustomPlot widget currently has. Line widths and texts etc. are not scaled up when larger widths/heights are used. If you want that effect, use the scale parameter.

For example, if you set both width and height to 100 and scale to 2, you will end up with an image file of size 200*200 in which all graphical elements are scaled up by factor 2 (line widths, texts, etc.). This scaling is not done by stretching a 100*100 image, the result will have full 200*200 pixel resolution.

If you use a high scaling factor, it is recommended to enable antialiasing for all elements via temporarily setting QCustomPlot::setAntialiasedElements to QCP::aeAll as this allows QCustomPlot to place objects with sub-pixel accuracy.

Atención: If calling this function inside the constructor of the parent of the QCustomPlot widget (i.e. the MainWindow constructor, if QCustomPlot is inside the MainWindow), always provide explicit non-zero widths and heights. If you leave width or height as 0 (default), this function uses the current width and height of the QCustomPlot widget. However, in Qt, these aren't defined yet inside the constructor, so you would get an image that has strange widths/heights.

The objects of the plot will appear in the current selection state. If you don't want any selected objects to be painted in their selected look, deselect everything with deselectAll before calling this function.

Returns true on success. If this function fails, most likely the BMP format isn't supported by the system, see Qt docs about QImageWriter::supportedImageFormats().

Ver también: savePdf, savePng, saveJpg, saveRastered

bool QCustomPlot::saveJpg	(	const QString &	fileName,
		int	width = `0`,
		int	height = `0`,
		double	scale = `1.0`,
		int	quality = `-1`
	)

Saves a JPG image file to fileName on disc. The output plot will have the dimensions width and height in pixels. If either width or height is zero, the exported image will have the same dimensions as the QCustomPlot widget currently has. Line widths and texts etc. are not scaled up when larger widths/heights are used. If you want that effect, use the scale parameter.

For example, if you set both width and height to 100 and scale to 2, you will end up with an image file of size 200*200 in which all graphical elements are scaled up by factor 2 (line widths, texts, etc.). This scaling is not done by stretching a 100*100 image, the result will have full 200*200 pixel resolution.

If you use a high scaling factor, it is recommended to enable antialiasing for all elements via temporarily setting QCustomPlot::setAntialiasedElements to QCP::aeAll as this allows QCustomPlot to place objects with sub-pixel accuracy.

Atención: If calling this function inside the constructor of the parent of the QCustomPlot widget (i.e. the MainWindow constructor, if QCustomPlot is inside the MainWindow), always provide explicit non-zero widths and heights. If you leave width or height as 0 (default), this function uses the current width and height of the QCustomPlot widget. However, in Qt, these aren't defined yet inside the constructor, so you would get an image that has strange widths/heights.

The objects of the plot will appear in the current selection state. If you don't want any selected objects to be painted in their selected look, deselect everything with deselectAll before calling this function.

JPG compression can be controlled with the quality parameter which must be between 0 and 100 or -1 to use the default setting.

Returns true on success. If this function fails, most likely the JPG format isn't supported by the system, see Qt docs about QImageWriter::supportedImageFormats().

Ver también: savePdf, savePng, saveBmp, saveRastered

bool QCustomPlot::savePdf	(	const QString &	fileName,
		bool	noCosmeticPen = `false`,
		int	width = `0`,
		int	height = `0`
	)

Saves a PDF with the vectorized plot to the file fileName. The axis ratio as well as the scale of texts and lines will be derived from the specified width and height. This means, the output will look like the normal on-screen output of a QCustomPlot widget with the corresponding pixel width and height. If either width or height is zero, the exported image will have the same dimensions as the QCustomPlot widget currently has.

noCosmeticPen disables the use of cosmetic pens when drawing to the PDF file. Cosmetic pens are pens with numerical width 0, which are always drawn as a one pixel wide line, no matter what zoom factor is set in the PDF-Viewer. For more information about cosmetic pens, see the QPainter and QPen documentation.

The objects of the plot will appear in the current selection state. If you don't want any selected objects to be painted in their selected look, deselect everything with deselectAll before calling this function.

Returns true on success.

Atención

If you plan on editing the exported PDF file with a vector graphics editor like Inkscape, it is advised to set noCosmeticPen to true to avoid losing those cosmetic lines (which might be quite many, because cosmetic pens are the default for e.g. axes and tick marks).
If calling this function inside the constructor of the parent of the QCustomPlot widget (i.e. the MainWindow constructor, if QCustomPlot is inside the MainWindow), always provide explicit non-zero widths and heights. If you leave width or height as 0 (default), this function uses the current width and height of the QCustomPlot widget. However, in Qt, these aren't defined yet inside the constructor, so you would get an image that has strange widths/heights.

Nota: On Android systems, this method does nothing and issues an according qDebug warning message.

Ver también: savePng, saveBmp, saveJpg, saveRastered

bool QCustomPlot::savePng	(	const QString &	fileName,
		int	width = `0`,
		int	height = `0`,
		double	scale = `1.0`,
		int	quality = `-1`
	)

Saves a PNG image file to fileName on disc. The output plot will have the dimensions width and height in pixels. If either width or height is zero, the exported image will have the same dimensions as the QCustomPlot widget currently has. Line widths and texts etc. are not scaled up when larger widths/heights are used. If you want that effect, use the scale parameter.

For example, if you set both width and height to 100 and scale to 2, you will end up with an image file of size 200*200 in which all graphical elements are scaled up by factor 2 (line widths, texts, etc.). This scaling is not done by stretching a 100*100 image, the result will have full 200*200 pixel resolution.

If you use a high scaling factor, it is recommended to enable antialiasing for all elements via temporarily setting QCustomPlot::setAntialiasedElements to QCP::aeAll as this allows QCustomPlot to place objects with sub-pixel accuracy.

Atención: If calling this function inside the constructor of the parent of the QCustomPlot widget (i.e. the MainWindow constructor, if QCustomPlot is inside the MainWindow), always provide explicit non-zero widths and heights. If you leave width or height as 0 (default), this function uses the current width and height of the QCustomPlot widget. However, in Qt, these aren't defined yet inside the constructor, so you would get an image that has strange widths/heights.

The objects of the plot will appear in the current selection state. If you don't want any selected objects to be painted in their selected look, deselect everything with deselectAll before calling this function.

If you want the PNG to have a transparent background, call setBackground(const QBrush &brush) with no brush (Qt::NoBrush) or a transparent color (Qt::transparent), before saving.

PNG compression can be controlled with the quality parameter which must be between 0 and 100 or -1 to use the default setting.

Returns true on success. If this function fails, most likely the PNG format isn't supported by the system, see Qt docs about QImageWriter::supportedImageFormats().

Ver también: savePdf, saveBmp, saveJpg, saveRastered

bool QCustomPlot::saveRastered	(	const QString &	fileName,
		int	width,
		int	height,
		double	scale,
		const char *	format,
		int	quality = `-1`
	)

Saves the plot to a rastered image file fileName in the image format format. The plot is sized to width and height in pixels and scaled with scale. (width 100 and scale 2.0 lead to a full resolution file with width 200.) If the format supports compression, quality may be between 0 and 100 to control it.

Returns true on success. If this function fails, most likely the given format isn't supported by the system, see Qt docs about QImageWriter::supportedImageFormats().

Ver también: saveBmp, saveJpg, savePng, savePdf

QList< QCPAxis * > QCustomPlot::selectedAxes ( ) const

Returns the axes that currently have selected parts, i.e. whose selection state is not QCPAxis::spNone.

Ver también: selectedPlottables, selectedLegends, setInteractions, QCPAxis::setSelectedParts, QCPAxis::setSelectableParts

QList< QCPGraph * > QCustomPlot::selectedGraphs ( ) const

Returns a list of the selected graphs. If no graphs are currently selected, the list is empty.

If you are not only interested in selected graphs but other plottables like QCPCurve, QCPBars, etc., use selectedPlottables.

Ver también: setInteractions, selectedPlottables, QCPAbstractPlottable::setSelectable, QCPAbstractPlottable::setSelected

QList< QCPAbstractItem * > QCustomPlot::selectedItems ( ) const

Returns a list of the selected items. If no items are currently selected, the list is empty.

Ver también: setInteractions, QCPAbstractItem::setSelectable, QCPAbstractItem::setSelected

QList< QCPLegend * > QCustomPlot::selectedLegends ( ) const

Returns the legends that currently have selected parts, i.e. whose selection state is not QCPLegend::spNone.

Ver también: selectedPlottables, selectedAxes, setInteractions, QCPLegend::setSelectedParts, QCPLegend::setSelectableParts, QCPLegend::selectedItems

QList< QCPAbstractPlottable * > QCustomPlot::selectedPlottables ( ) const

Returns a list of the selected plottables. If no plottables are currently selected, the list is empty.

There is a convenience function if you're only interested in selected graphs, see selectedGraphs.

Ver también: setInteractions, QCPAbstractPlottable::setSelectable, QCPAbstractPlottable::setSelected

void QCustomPlot::selectionChangedByUser ( )

signal

This signal is emitted after the user has changed the selection in the QCustomPlot, e.g. by clicking. It is not emitted when the selection state of an object has changed programmatically by a direct call to setSelected() on an object or by calling deselectAll.

In addition to this signal, selectable objects also provide individual signals, for example QCPAxis::selectionChanged or QCPAbstractPlottable::selectionChanged. Note that those signals are emitted even if the selection state is changed programmatically.

See the documentation of setInteractions for details about the selection mechanism.

Ver también: selectedPlottables, selectedGraphs, selectedItems, selectedAxes, selectedLegends

void QCustomPlot::setAntialiasedElement	(	QCP::AntialiasedElement	antialiasedElement,
		bool	enabled = `true`
	)

Sets whether the specified antialiasedElement is forcibly drawn antialiased.

See setAntialiasedElements for details.

Ver también: setNotAntialiasedElement

void QCustomPlot::setAntialiasedElements ( const QCP::AntialiasedElements & antialiasedElements )

Sets which elements are forcibly drawn antialiased as an or combination of QCP::AntialiasedElement.

This overrides the antialiasing settings for whole element groups, normally controlled with the setAntialiasing function on the individual elements. If an element is neither specified in setAntialiasedElements nor in setNotAntialiasedElements, the antialiasing setting on each individual element instance is used.

For example, if antialiasedElements contains QCP::aePlottables, all plottables will be drawn antialiased, no matter what the specific QCPAbstractPlottable::setAntialiased value was set to.

if an element in antialiasedElements is already set in setNotAntialiasedElements, it is removed from there.

Ver también: setNotAntialiasedElements

void QCustomPlot::setAutoAddPlottableToLegend ( bool on )

If set to true, adding a plottable (e.g. a graph) to the QCustomPlot automatically also adds the plottable to the legend (QCustomPlot::legend).

Ver también: addPlottable, addGraph, QCPLegend::addItem

void QCustomPlot::setBackground ( const QPixmap & pm )

Sets pm as the viewport background pixmap (see setViewport). The pixmap is always drawn below all other objects in the plot.

For cases where the provided pixmap doesn't have the same size as the viewport, scaling can be enabled with setBackgroundScaled and the scaling mode (whether and how the aspect ratio is preserved) can be set with setBackgroundScaledMode. To set all these options in one call, consider using the overloaded version of this function.

If a background brush was set with setBackground(const QBrush &brush), the viewport will first be filled with that brush, before drawing the background pixmap. This can be useful for background pixmaps with translucent areas.

Ver también: setBackgroundScaled, setBackgroundScaledMode

void QCustomPlot::setBackground	(	const QPixmap &	pm,
		bool	scaled,
		Qt::AspectRatioMode	mode = `Qt::KeepAspectRatioByExpanding`
	)

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Allows setting the background pixmap of the viewport, whether it shall be scaled and how it shall be scaled in one call.

Ver también: setBackground(const QPixmap &pm), setBackgroundScaled, setBackgroundScaledMode

void QCustomPlot::setBackground ( const QBrush & brush )

Sets the background brush of the viewport (see setViewport).

Before drawing everything else, the background is filled with brush. If a background pixmap was set with setBackground(const QPixmap &pm), this brush will be used to fill the viewport before the background pixmap is drawn. This can be useful for background pixmaps with translucent areas.

Set brush to Qt::NoBrush or Qt::Transparent to leave background transparent. This can be useful for exporting to image formats which support transparency, e.g. savePng.

Ver también: setBackgroundScaled, setBackgroundScaledMode

void QCustomPlot::setBackgroundScaled ( bool scaled )

Sets whether the viewport background pixmap shall be scaled to fit the viewport. If scaled is set to true, control whether and how the aspect ratio of the original pixmap is preserved with setBackgroundScaledMode.

Note that the scaled version of the original pixmap is buffered, so there is no performance penalty on replots. (Except when the viewport dimensions are changed continuously.)

Ver también: setBackground, setBackgroundScaledMode

void QCustomPlot::setBackgroundScaledMode ( Qt::AspectRatioMode mode )

If scaling of the viewport background pixmap is enabled (setBackgroundScaled), use this function to define whether and how the aspect ratio of the original pixmap is preserved.

Ver también: setBackground, setBackgroundScaled

bool QCustomPlot::setCurrentLayer ( const QString & name )

Sets the layer with the specified name to be the current layer. All layerables (QCPLayerable), e.g. plottables and items, are created on the current layer.

Returns true on success, i.e. if there is a layer with the specified name in the QCustomPlot.

Layer names are case-sensitive.

Ver también: addLayer, moveLayer, removeLayer, QCPLayerable::setLayer

bool QCustomPlot::setCurrentLayer ( QCPLayer * layer )

Esta es una función miembro sobrecargada que se suministra por conveniencia. Difiere de la anterior función solamente en los argumentos que acepta.

Sets the provided layer to be the current layer.

Returns true on success, i.e. when layer is a valid layer in the QCustomPlot.

Ver también: addLayer, moveLayer, removeLayer

void QCustomPlot::setInteraction	(	const QCP::Interaction &	interaction,
		bool	enabled = `true`
	)

Sets the single interaction of this QCustomPlot to enabled.

For details about the interaction system, see setInteractions.

Ver también: setInteractions

void QCustomPlot::setInteractions ( const QCP::Interactions & interactions )

Sets the possible interactions of this QCustomPlot as an or-combination of QCP::Interaction enums. There are the following types of interactions:

Axis range manipulation is controlled via QCP::iRangeDrag and QCP::iRangeZoom. When the respective interaction is enabled, the user may drag axes ranges and zoom with the mouse wheel. For details how to control which axes the user may drag/zoom and in what orientations, see QCPAxisRect::setRangeDrag, QCPAxisRect::setRangeZoom, QCPAxisRect::setRangeDragAxes, QCPAxisRect::setRangeZoomAxes.

Plottable selection is controlled by QCP::iSelectPlottables. If QCP::iSelectPlottables is set, the user may select plottables (graphs, curves, bars,...) by clicking on them or in their vicinity (setSelectionTolerance). Whether the user can actually select a plottable can further be restricted with the QCPAbstractPlottable::setSelectable function on the specific plottable. To find out whether a specific plottable is selected, call QCPAbstractPlottable::selected(). To retrieve a list of all currently selected plottables, call selectedPlottables. If you're only interested in QCPGraphs, you may use the convenience function selectedGraphs.

Item selection is controlled by QCP::iSelectItems. If QCP::iSelectItems is set, the user may select items (QCPItemLine, QCPItemText,...) by clicking on them or in their vicinity. To find out whether a specific item is selected, call QCPAbstractItem::selected(). To retrieve a list of all currently selected items, call selectedItems.

Axis selection is controlled with QCP::iSelectAxes. If QCP::iSelectAxes is set, the user may select parts of the axes by clicking on them. What parts exactly (e.g. Axis base line, tick labels, axis label) are selectable can be controlled via QCPAxis::setSelectableParts for each axis. To retrieve a list of all axes that currently contain selected parts, call selectedAxes. Which parts of an axis are selected, can be retrieved with QCPAxis::selectedParts().

Legend selection is controlled with QCP::iSelectLegend. If this is set, the user may select the legend itself or individual items by clicking on them. What parts exactly are selectable can be controlled via QCPLegend::setSelectableParts. To find out whether the legend or any of its child items are selected, check the value of QCPLegend::selectedParts. To find out which child items are selected, call QCPLegend::selectedItems.

All other selectable elements The selection of all other selectable objects (e.g. QCPPlotTitle, or your own layerable subclasses) is controlled with QCP::iSelectOther. If set, the user may select those objects by clicking on them. To find out which are currently selected, you need to check their selected state explicitly.

If the selection state has changed by user interaction, the selectionChangedByUser signal is emitted. Each selectable object additionally emits an individual selectionChanged signal whenever their selection state has changed, i.e. not only by user interaction.

To allow multiple objects to be selected by holding the selection modifier (setMultiSelectModifier), set the flag QCP::iMultiSelect.

Nota: In addition to the selection mechanism presented here, QCustomPlot always emits corresponding signals, when an object is clicked or double clicked. see plottableClick and plottableDoubleClick for example.

Ver también: setInteraction, setSelectionTolerance

void QCustomPlot::setMultiSelectModifier ( Qt::KeyboardModifier modifier )

Sets the keyboard modifier that will be recognized as multi-select-modifier.

If QCP::iMultiSelect is specified in setInteractions, the user may select multiple objects by clicking on them one after the other while holding down modifier.

By default the multi-select-modifier is set to Qt::ControlModifier.

Ver también: setInteractions

void QCustomPlot::setNoAntialiasingOnDrag ( bool enabled )

Sets whether antialiasing is disabled for this QCustomPlot while the user is dragging axes ranges. If many objects, especially plottables, are drawn antialiased, this greatly improves performance during dragging. Thus it creates a more responsive user experience. As soon as the user stops dragging, the last replot is done with normal antialiasing, to restore high image quality.

Ver también: setAntialiasedElements, setNotAntialiasedElements

void QCustomPlot::setNotAntialiasedElement	(	QCP::AntialiasedElement	notAntialiasedElement,
		bool	enabled = `true`
	)

Sets whether the specified notAntialiasedElement is forcibly drawn not antialiased.

See setNotAntialiasedElements for details.

Ver también: setAntialiasedElement

void QCustomPlot::setNotAntialiasedElements ( const QCP::AntialiasedElements & notAntialiasedElements )

Sets which elements are forcibly drawn not antialiased as an or combination of QCP::AntialiasedElement.

This overrides the antialiasing settings for whole element groups, normally controlled with the setAntialiasing function on the individual elements. If an element is neither specified in setAntialiasedElements nor in setNotAntialiasedElements, the antialiasing setting on each individual element instance is used.

For example, if notAntialiasedElements contains QCP::aePlottables, no plottables will be drawn antialiased, no matter what the specific QCPAbstractPlottable::setAntialiased value was set to.

if an element in notAntialiasedElements is already set in setAntialiasedElements, it is removed from there.

Ver también: setAntialiasedElements

void QCustomPlot::setPlottingHint	(	QCP::PlottingHint	hint,
		bool	enabled = `true`
	)

Sets the specified plotting hint to enabled.

Ver también: setPlottingHints

void QCustomPlot::setPlottingHints ( const QCP::PlottingHints & hints )

Sets the plotting hints for this QCustomPlot instance as an or combination of QCP::PlottingHint.

Ver también: setPlottingHint

void QCustomPlot::setSelectionTolerance ( int pixels )

Sets the tolerance that is used to decide whether a click selects an object (e.g. a plottable) or not.

If the user clicks in the vicinity of the line of e.g. a QCPGraph, it's only regarded as a potential selection when the minimum distance between the click position and the graph line is smaller than pixels. Objects that are defined by an area (e.g. QCPBars) only react to clicks directly inside the area and ignore this selection tolerance. In other words, it only has meaning for parts of objects that are too thin to exactly hit with a click and thus need such a tolerance.

Ver también: setInteractions, QCPLayerable::selectTest

void QCustomPlot::setViewport ( const QRect & rect )

Sets the viewport of this QCustomPlot. The Viewport is the area that the top level layout (QCustomPlot::plotLayout()) uses as its rect. Normally, the viewport is the entire widget rect.

This function is used to allow arbitrary size exports with toPixmap, savePng, savePdf, etc. by temporarily changing the viewport size.

void QCustomPlot::titleClick	(	QMouseEvent *	event,
		QCPPlotTitle *	title
	)

signal

This signal is emitted when a plot title is clicked.

event is the mouse event that caused the click and title is the plot title that received the click.

Ver también: titleDoubleClick

void QCustomPlot::titleDoubleClick	(	QMouseEvent *	event,
		QCPPlotTitle *	title
	)

signal

This signal is emitted when a plot title is double clicked.

event is the mouse event that caused the click and title is the plot title that received the click.

Ver también: titleClick

void QCustomPlot::toPainter	(	QCPPainter *	painter,
		int	width = `0`,
		int	height = `0`
	)

Renders the plot using the passed painter.

The plot is sized to width and height in pixels. If the painter's scale is not 1.0, the resulting plot will appear scaled accordingly.

Nota: If you are restricted to using a QPainter (instead of QCPPainter), create a temporary QPicture and open a QCPPainter on it. Then call toPainter with this QCPPainter. After ending the paint operation on the picture, draw it with the QPainter. This will reproduce the painter actions the QCPPainter took, with a QPainter.

Ver también: toPixmap

QPixmap QCustomPlot::toPixmap	(	int	width = `0`,
		int	height = `0`,
		double	scale = `1.0`
	)

Renders the plot to a pixmap and returns it.

The plot is sized to width and height in pixels and scaled with scale. (width 100 and scale 2.0 lead to a full resolution pixmap with width 200.)

Ver también: toPainter, saveRastered, saveBmp, savePng, saveJpg, savePdf

QRect QCustomPlot::viewport ( ) const

inline

Returns the viewport rect of this QCustomPlot instance. The viewport is the area the plot is drawn in, all mechanisms, e.g. margin caluclation take the viewport to be the outer border of the plot. The viewport normally is the rect() of the QCustomPlot widget, i.e. a rect with top left (0, 0) and size of the QCustomPlot widget.

Don't confuse the viewport with the axis rect (QCustomPlot::axisRect). An axis rect is typically an area enclosed by four axes, where the graphs/plottables are drawn in. The viewport is larger and contains also the axes themselves, their tick numbers, their labels, the plot title etc.

Only when saving to a file (see savePng, savePdf etc.) the viewport is temporarily modified to allow saving plots with sizes independent of the current widget size.

La documentación para esta clase fue generada a partir de los siguientes ficheros:

Tipos públicos

Señales

Métodos públicos

Atributos públicos

Métodos protegidos

Atributos protegidos

Amigas

Descripción detallada

Documentación de las enumeraciones miembro de la clase

Documentación del constructor y destructor

Documentación de las funciones miembro